Customization: | Available |
---|---|
Task: | Program |
Structure: | Closed-Loop |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
General details | |||||||||||||||||||||||||||||
Model | L532 | ||||||||||||||||||||||||||||
Main technical data | |||||||||||||||||||||||||||||
Start type | Direct on line | ||||||||||||||||||||||||||||
Qty of controlled pump | Dublex pump | ||||||||||||||||||||||||||||
Rated input voltage | AC380V Three Phase 50HZ/ 60HZ |
||||||||||||||||||||||||||||
Rated output power | 0. 75kw-4kw (1hp-5.5hp) 5.5kw-11kw (7.5hp-15hp) 15kw (20hp)
|
||||||||||||||||||||||||||||
Protection function |
Over load protection Pump stalled protection Dry run protection with sensor free Under voltage protection Over voltage protection Repeat start protection Open phase protection Over temperature protection |
||||||||||||||||||||||||||||
Application & Control characteristic |
Control and protect general pump Using water level sensor , float switch or pressure switch or level/pressure transmitter to control pump start and stop Applied for water supply by liquid level control through float switch or liquid probe Applied for water supply by pressure control through pressure switch and pressure tank Applied for drainage by liquid level control through float switch or liquid probe |
||||||||||||||||||||||||||||
Control characteristic | Duplex pump control .Main pump/standby pump automatically alternate .Main pump/standby pump automatically switch against malfunction .Standby pump participate running if required |
||||||||||||||||||||||||||||
Other features | Pump last five faults record displaying Pump accumulative running time displaying Pump shaft anti-rust Present RS485 port Remote control panel(Optional) Present one passive dry contact point(BA port) A/B Pump operation enable or disable function LCD screen locked function under anto state(Settable) LCD screen displaying pump running status Memory function when power off & recovery Liquid level transmission distance<1000m Pump start time delay(Time settable) Pump stop time delay(Time settable) Data acquisitor(Optional) Present user remote monitor Push button calibration |
||||||||||||||||||||||||||||
Main installation data | |||||||||||||||||||||||||||||
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H) |
-25ºC-- +55ºC 20%--90%RH, no drips concreted IP54 Wall mounting 310×220×120mm |
||||||||||||||||||||||||||||
SET/CTN Packing Size | 6 sets/ctn 69*58*46cm |