Customization: | Available |
---|---|
Task: | Adjust |
Structure: | Combination |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
RO Controller is specially designed for reverse osmosis water purification unit by contacting dosing
pumps,solenoid valve, electrical meter, pressure switch etc;
Specially designed for reverse osmosis water purification unit.
General details | |
Application | Design for reverse osmosis water purification unit,DOL |
Model | RO 2-2 |
Main technical data | |
Start type | Direct on line |
Qty of controlled pump | Duplex pump |
Rated input voltage | AC220V-240V Single Phase 50HZ/ 60HZ |
Rated output power for RAW Water Pump(RWP) High Pressure Pump(HPP)Solenoid valve | Single phase(0.37kw-2.2kw) Single phase(0.37kw-2.2kw) Normally closed type(AC220V.) |
Protection function |
Over load protection Pump stalled protection Dry run protection Under voltage protection Over voltage protection Open phase protection |
Application & Control characteristic |
Present terminal port for pressure switch(LPS/HPS) Present terminal port for Level sensor in products tanker Present terminal port for float switch in raw water tanker Present terminal port for 2 dosing pumps,1 electrical meter Controlling 4 outputs Raw water pump(RWP) High pressure pump(HPP) the flushing solenoid value No-power Contact for alarm |
Other features | Pump last five faults record displaying Pump accumulative running time displaying Push button calibration Parameter adjustment manual Memory function when power off&recovery Present RS485 port |
Main installation data | |
Working temperature Working humidity Degree of protection Install position Unit dimension (L x W x H) |
-25ºC-- +55ºC 20%--90%RH, no drips concreted IP54 Wall mounting 310×240×120mm |