Osmosis Water Pump Control Box RO 2-2

• Customization: Available
• Task: Program
• Structure: Closed-Loop
• Model NO.: RO 2-2
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Material: Plastic
• Transport Package: Carton Packing
• Specification: CE
• Trademark: Leading
• Origin: China
• HS Code: 90328990
• Production Capacity: 5000PCS/Year

Product Description

Specially designed for reverse osmosis water purification unit.

Application:
Protection & Control of duplex pump, single phase
Main features:

Double pump control

Auto / Manual switch
Push button calibration
Pump stalled protection
Transient surge protection
Open phase protection
Dry running protection without installing float switch or liquid probe in the well
Prompt for uncompleted parameter calibrating
Pump accumulative running time displaying
Pump last five fault record displaying
LCD displays pump running time displaying
RS485 communication interface
Rapid cycle protection
Pump shaft rust protection
Pump motor winding over temperature protection
Three phase unbalance protection
Phase reversal protection

Main specifications:
Rated input voltage: AC220/Sinle phase
Rated frequency: 50Hz/60Hz
Rated output power of pump motor: 0.37-2.2kw
 

Application	Design for reverse osmosis water purification unit , DOL
Model	RO 2-2
Rated input voltage	AC220V-240V Single phase 50HZ/ 60HZ
Rated input voltage for RAW Water Pump(RWP) High Pressure Pump(HPP) Solenoid valve	Single phase(0.37-2.2kw) Single phase(0.37-2.2kw)
	Normally closed type(AC 220V.)
Protection function	Over load protection Pump stalled protection Dry run protection Under voltage protection Over voltage protection Open phase protection
Control characteristic	Having the complete operating logic of the process pre-programmed . Present terminal port for Pressure switch(LPS /HPS), Present terminal port for Level senor in products tanker , Present terminal port for Float switch in raw water tanker Present terminal port for 2 dosing pumps,1 electrical meter . Controlling the 4 outputs: Raw water pump(RWP), High pressure pump(HPP) The flushing solenoid valve . No-Power Contact for Alarm
Other features	Pump accumulative running time displaying Pump five faults record displaying Menu opening for parameter adjustment Push button calibration Memory function when power off & recovery RS485 Communication
Main installation data
Working temperature	-25ºC-- +55ºC
Working humidity	20%--90%RH, no drips concreted
Degree of protection	IP54
Install position	Wall mounting
Unit dimension (L x W x H)	310*220*120mm